top of page
Writer's pictureLuu Vinh

How Much Does Driveway Gate Installation Cost in 2024?


Driveway Gate Installation Cost in 2023

A driveway gate is an excellent way to add security and value to your property. The national average cost to install a driveway gate is $4,830, with prices typically ranging between $1,230 and $9,020. Driveway gate costs will vary based on size, materials, and features.


Average Driveway Gate Installation Cost in 2023

National Average Cost

$4,830

Typical Price Range

$1,230 – $9,020

Extreme Low-End Cost

$300

Extreme High-End Cost

$10,200

A driveway gate's cost varies based on many factors. Size, materials, design, and various features all factor in the final cost.


Gates typically come in 12, 14, 16, and 18-foot widths, with costs increasing for each successive size. Gates can be made from various materials, with vinyl being the least expensive and wood or metal costing significantly more. Automation and sensors each add to the project's cost, as well.


If you're looking for extreme savings, installing a 12-foot, manual vinyl gate yourself will get you as close to the low end of the market (about $300) as possible.


Homeowners with significant funds could pay a contractor to install an 18-foot sliding or dual-panel automatic metal gate made of high-end materials. This, along with add-ons like sensors, cameras, keypads, intercoms, and bollards, can increase the final price to as much as $10,200.


Driveway Gate Cost Estimator by Size


Driveway gates typically come in 12, 14, 16, and 18-foot increments. These costs vary by material, automation, installation method, and add-ons. Considering these possible modifications, overall cost estimates by gate size typically fall in the following ranges:

Gate Width (Feet)

Typical Range

12

$600 – $4,900

14

$750 – $5,500

16

$1,000 – $6,300

18

$1,350 – $7,500


Driveway Gate Cost Estimator by Material


Size and material are the two most significant factors affecting the cost of your driveway gate project. Materials such as vinyl can provide significant cost savings. At the same time, wooden, steel, wrought iron, and aluminium gates can significantly increase costs.


Vinyl


vinyl gate

Vinyl is a plastic-like material made from polyvinyl chloride, aka PVC, and vinyl gates typically cost between $560 and $3,110. Vinyl fencing is low-maintenance, low-cost, resistant to deterioration, and comes in various colors. The downsides? It's not biodegradable, it can stain from mould or mildew, and it's easy to damage in extreme weather situations.


Wood


wood gate

Wood gates offer beautiful natural wood grains that can be shaped into various designs and painted or stained. Wooden gates typically cost between $530 and $6,330, depending on the type of wood.


Most HOAs approve of wood; however, it can be temperamental. It's prone to splintering, weathering, and rotting over time, and its life expectancy is significantly less than vinyl.


Aluminum


Aluminium gate

Aluminum is one of the most low-maintenance fencing materials available. An aluminium gate should cost about $1,930 to $5,560. Unlike iron or steel, aluminium will not rust. It can be painted and will not crack or split like wood. It is also resistant to mould and mildew. Aluminium is lighter and weaker than steel or iron and more susceptible to dents.


Wrought Iron


Wrought Iron gate

Wrought iron is a strong, aesthetically pleasing fence material with durability and beauty. A wrought iron gate will usually cost from $1,700 to $5,830. Wrought iron is also heavy, expensive, and offers little in the way of privacy.


Steel


steel gate

Like iron, steel is strong, heavy, and durable. Steel fencing requires a professional, often with welding skills, to install. The difficulty to install and adapt, and the fact that steel fencing offers little privacy, make it an uncommon choice for residential properties. Steel gates cost $1,865 to $8,300.


Other Factors That Affect Cost


Several factors beyond size and material can influence your final cost. The type of gate you choose, and its functionality will modify your bottom line.


Manual vs. Automatic

Gate Type

Materials Cost – Low-End

Materials Cost – High-End

Manual

$640

$2,200

Automatic

$1,200

$6,650

Upgrading from a manual gate to an automatic or electric gate represents a significant cost increase. Automatic driveway gate cost increases so much because a number of electrical components need to be installed. Power must also be run to the electric driveway gate, captured via solar, and stored at the site.


Most significantly, automatic gates require the addition of a motor which can increase costs anywhere from $820 to $4,500. Remote gate openers, or automatic gate openers, costing between $440 and $2,290, represent another additional cost when deciding to go automatic.


Sliding vs. Swinging


Sliding gates


In cases where there is limited space for a swing gate to open, a sliding gate may offer a better solution for your property. Sliding gates typically come with additional hardware, such as tracks and chains. Below are material cost comparisons for sliding and swinging gates. The cost of installation and maintenance are not included.


Gate Type

Materials Cost – Low-End

Materials Cost – High-End

Sliding

$645

$3,750

Swinging

$465

$6,150


Single-Panel vs. Dual-Panel


Some homeowners may prefer the look and feel of a dual or double gate to a single swing gate panel. A dual-panel gate opens from both sides by swinging or sliding in multiple directions.


Shifting to a dual-panel gate requires additional cost as both sides of the gate require a motor and hardware to operate. While a single-panel gate ranges from $800 – $3,080, costs increase for a dual-panel to $1,190 – $4,650.

Gate Type

Materials Cost – Low-End

Materials Cost – High-End

Single

$800

$3,080

Dual

$1,190

$4,650


Lift Gates


Lift gates, sometimes called vertical lift gates, overhead gates, or pivot gates, are used in cases with limited space for a swing gate to open. The cost for lift gates typically ranges from $500 to $5,250, with high-end installations reaching up to $11,250.


Permits


Permit costs vary depending on local laws and homeowners association rules. On average, you will pay between $95 and $200 to cover local permits.


Labor Costs


Homeowners should also factor in labor costs to install their gates professionally. Contractor rates for this work are estimated at $30 – $80 per hour.


Maintenance


Driveway gates can last decades with regular maintenance. It is advisable to begin saving for replacement components after a decade of usage. Homeowners can contract annual maintenance from a pro at about $30 – $80 per hour or clean and lubricate moving parts.


Homeowners can deal with most maintenance issues using a few inexpensive supplies:

  • Rust remover: $10

  • Steel wool (for scrubbing rust): $6

  • Rust-Oleum (protective coating): $8

  • Lubricant (such as WD40): $6

Accessories


A host of accessories can be added to your gate. Each represents a cost increase.

Intercoms


Intercoms allow for verbal communication between visitors at the gate and the homeowner. Adding an intercom to your driveway gate costs between $680 and $3,500.


Cameras


Cameras allow homeowners to see who is attempting to gain access to the property at their driveway gate. Adding a camera to your driveway gate installation will increase the price by $415 to $1,835.


Keypads


Keypads allow for coded entry through your driveway gate via PIN. This is helpful when you need to provide limited access to service companies, relatives, and friends without giving each a remote. Adding a keypad entry to your driveway gate installation costs $200 to $550.


Sensors


Sensors can be installed to open and close your driveway gate automatically as a car approaches. Adding sensors to your driveway gate will add $240 to $460 to your installation costs.


Bollards


Bollards are concrete pillars for traffic management, curb appeal, and security. Homeowners usually place multiple bollards around entry gates. Adding bollards to your entry gate will run between $3,000 and $6,000.


Related Services


Homeowners installing a driveway gate are typically interested in curb appeal. There are a number of related services that can complement your driveway gate.


Fences


How Much Does Driveway Gate Installation Cost in Melbourne


A new driveway gate looks great with a matching fence. The average cost for installing a fence is $3,440, with typical prices ranging from $1,330 to $5,550. Low-end installations will cost around $400, while high-end installations can reach upward of $10,000. Cost varies based on material, with wood and vinyl fences costing less than iron fences.


Driveways


A variety of driveway options are available, ranging from an inexpensive gravel driveway to costly asphalt, concrete, and paver driveways.

Types of Driveways

Typical Price Range

Cost of an asphalt driveway

$3,086 – $7,912

Cost of a concrete driveway

$1,885 – $6,475

Cost of a paver driveway

$5,500 – $26,000

Cost of a gravel driveway

$600 – $1,800

Driveway Sealing


Sealing a driveway involves filling in cracks and holes to extend its life. The national average cost for sealing your driveway is $305, while the typical price ranges from $176 – $444. The least you can expect to pay is around $110, while the most you can expect to pay is about $1,230.


Heated Driveways


Heated driveways are great for cold weather climates because they prevent your driveway from freezing. The national average cost for installing a heated driveway is $6,485, and most jobs range between $4,060 and $12,460, or $12 to $23 per square foot.


Brick Mailbox


A brick mailbox with masonry matching your driveway gate adds curb appeal. Brick mailbox costs average between $560 and $1,340.


Pro Cost vs. DIY Cost


Many driveway gate kits come with directions for do-it-yourself installation, with some solar gates having self-contained electrical units for easy installation. The average homeowner should be able to complete these basic low-end projects on their own, with costs ranging from $880 – $8,670, with most of the cost going toward purchasing the gate.


DIY Equipment

Cost

Gate/Posts

$530 – $8,300

Concrete

$50 – $75

Shovel

$20

Wheelbarrow

$60

Tape measure

$18

Work Gloves

$18

Wrench

$12

Post Hole Digger (Purchase)

$170

Post Hole Digger (Rental)

$10 per hour

Total Cost – DIY

$880 – $8,670

Should you install a driveway gate on your own?


Suppose your selected gate includes integrated electricity and electronic accessories such as remote control gate openers, cameras, keypads, and intercoms. In that case, you should hire a professional electrician to ensure proper installation.


When outsourcing installation services, a $30-$80/hour labor cost should be added to your estimates. On projects ranging from 1 – 4 days, you can expect to pay $240 – $2,560 in labor costs. A benefit of contracting services is that most work comes with a warranty or service agreement from the provider.


FAQ


Will installing a driveway gate improve my security?


Driveway gates are a theft deterrent and are key in security systems because they prevent easy access and escape from a property. Thieves generally avoid homes with obstructed entry and exit.

Because driveway gates offer improved home security, many insurance companies will offer discounts on your homeowner's insurance following installation. Confirm with your insurance provider that this added security is a discount before beginning the project.


How long does it take to install a driveway gate?


The typical driveway gate installation process will take 1 to 4 days. General contractors may break the project into smaller sections and spread it out over a longer period. It's always a good idea to get a project timeline from your contractor so you can confirm they're hitting project benchmarks.

How wide should my driveway gate be?


Homeowners should evaluate which vehicles will utilize the driveway to determine the proper gate width. Larger vehicles, such as RVs, may require greater turn radiuses and thus larger widths to ensure clearance.

What happens if my electric gate won't operate properly?


You should ensure your electric gate comes with either a battery backup or manual release with a key. These features will ensure access to the property during power outages and other electrical issues.


Will installing a driveway gate increase my home/property values?


Simple, inexpensive gates may add little value to your property. Still, larger automated gates with stone embellishments can increase property values and improve curb appeal.


What shapes do driveway gates come in?


Driveway gates come in a variety of shapes. The most common are standard arc, inverted arc, valley, peak, bell curve, and high-low.


Which way should my driveway gate swing?


Some driveway gates swing in and out, but most have a single swing direction. It's up to the homeowner to decide which is best for them. Many experts recommend you swing your gate inward toward the property to avoid any possible interactions with cars or bystanders outside the property. If you need help deciding, a sliding gate is always a great alternative.


Final Thoughts


Driveway gate installation costs vary greatly based on size, material, and accessories. Homeowners that carefully review their options should be able to determine installation costs ranging between $1,230 and $9,020, and near the national average of $4,830.


562 views0 comments

Comments


bottom of page