If you’re new to fencing, you may wonder what type of screws you should use to build your new backyard fence.
Ensuring the proper fasteners is key to building a long-lasting fence.
We’ll cover what screws are recommended and which screws to avoid using.
Screws can be used in several phases of fence building.
They can be used to install fence rails to a fence post and fence boards and “pickets” to the fence rail.
Lastly, they can be used to hang gate brackets to fence posts.
All those contact points are crucial to a fence, and you want to ensure you’re using the best screws built for excellent holding power.
Polymer-coated exterior screws or stainless steel screws are best for installing fence boards, while exterior-rated structural screws are best for attaching fence rails to fence posts.
Below we discuss the screws above in detail and showcase why we think they’re best for building your new backyard fence and how we will use them in our new fence.
Polymer/Ceramic Coated exterior screws
You might be scratching your head when I say polymer or ceramic-coated exterior screws, but you always see them at the big box stores.
They are the tan and green screws rated for exterior use, often called “deck screws.”
They are coated with a polymer coating that doesn’t rust like regular zinc interior screws.
Stainless Steel Screws
Stainless steel screws are best when using certain hardwoods, such as Ipe or Cumaru, since their oils can corrode other types of screws.
These screws will cost 2-3 times more than regular exterior screws and are harder to install due to their need to be predrilled.
Stainless steel is a softer metal, so screw heads can pop off if too much torque is applied.
While all this sounds like reasons not to use stainless steel screws, they will never rust, making them excellent exterior screws.
They require extra time and patience to install.
Structural Screws
While structural screws look like regular screws, they are VERY different.
They have the holding capacity to rival lag screws and lag bolts but are much easier to install.
While they have been around a while, they are only becoming more common in the past several years.
I’ve used them for 7-8 years on several decks I’ve built due to their easy installation and holding strength.
While they are more expensive than regular screws, they are worth every penny for the comfort you will feel when the next big storm comes around with heavy winds, which is frequent in Florida.
Structural screws can hold between 250-400 lbs. while regular screws are rated far below 80-100 lbs.
I use GRKs R4 structural screws to attach fence rails to my posts.
I like installing my rails in the middle of the posts and not on the outside.
In my opinion, the fence looks more balanced than everything installed outside the fence post.
When you attach rails to the inside of the fence post, they will either be installed with brackets or diagonally screwed through rails to the posts.
Using a Kreg pocket hole jig makes it easier if you’re not used to driving screws at an angle.
You can use a 2.5 – 3 inch long screw for the proper holding strength for the rail to the post.
Kreg has a new XL jig and larger exterior-rated screws for greater holding strength.
I may test these on my fence to see how well they work.
Screws Not to Use
People tend to go to the store and pick up the cheapest screws to build everything.
Often, these will be screws only meant to be used indoors, where they will never become wet. Drywall and Zinc coated screws are not meant to be used outdoors.
They will rust quickly and disintegrate until they can no longer hold your fence board or rail.
Conclusion
Ultimately, you will pay more by repairing and replacing fencing installed with cheap interior screws and the time it takes to replace every single screw.
Use the proper screws for your new fence, and you’ll be very happy with your good-looking, long-lasting DIY project.
Comments